PRODUCT
ARTIS
Decorative plaster proartis stucco
Decorative acrylic-based plaster. With it, a "marble effect" is achieved in different color solutions. Plaster has excellent vapor permeability; therefore, it prevents the formation of mold and mildew. The product is non-toxic to humans and the environment and non-flammable.
PREPARATION
The base must be well cleaned and free of greasy stains. It is recommended to apply a primer before applying the plaster. In this way, good adhesion between the plaster and the base is ensured.
Laying
The product is applied in three coats with a trowel for Venetian plaster.
1. First coat – apply evenly and wait for
dry for approximately 10-12 hours.
2. Second hand – a thin layer of the product is applied to masks until a completely smooth surface is achieved. Allow to dry approximately 6-8 hours.
3. Third hand – very fine masks are applied and the surface is polished with the edge of the mask.
PROTECTION
The plaster dries completely after 4 days, after which ProGLACIS (sealing surface layer) can be applied, which makes it resistant to washing.
SPENDING RATE
100-150 g/m² for one layer
EXPIRY DATE
18 months from the date of manufacture
STORAGE
In dry rooms, at a temperature of 5°C to 30°C. Protect from direct sunlight.
PACKAGE
1 kg, 5 kg, 20 kg
technical specifications
| Dilution: | ready to use |
| Application tools: | stainless steel spatula or plastering trowel |
| Application temperature: | from 10 °C to 30 °C (at relative humidity of the air not exceeding 80%) |
| Complete drying up: | 4 days (at temperature 20 °C and relative humidity of 80%) |
| Cleaning of the tools: | with water |
| Specific weight: | 1.5 kg/cu.m ± 3% |
| Viscosity: | 60 000 ÷ 80 000 CPS Brookfield (at temperature 25 °C and RVT 20 vol/min) |
