PRODUCT
Universal adhesive DENKOL
Universal adhesive DENKOL
For gluing EPS+XPS thermal insulation boards.
For thin-layer laying of porous ceramic, faience and terracotta tiles on floors and walls on concrete and lime-cement plasters in dry rooms.
Strengths:
• Easy to make the mixture.
• Excellent adhesion to the base.
• Excellent smoothing.
• Let’s in gases and vapors.
• Environmentally friendly.
PREPARATION
The surface must be clean, free of dust and any dirt.
PREPARATION OF THE MIXTURE: In a container with smooth walls, 8L of water are poured for one package of 25 kg with a stirrer or by hand. Allow the mixture to stand for about 10 minutes, then stir again and add more water if necessary. The mixture thus prepared can be used within 30 minutes. The temperature of the water should not be above 20°C.
Laying
The solution is applied manually up to 30 minutes after its preparation. It is processed with a notched trowel with a tooth size of 5 to 8 mm. It is not desirable to apply glue to areas that cannot be covered with a lining for 15-20 minutes.
RECOMMENDATION
It is not recommended to add other materials to the finished solution.
EXPIRY DATE
18 months from the date of manufacture
STORAGE
Store in a dry and ventilated place.
PACKAGE
25 kg
technical specifications
| For bonding thermal insulation boards: | |
| Compressive strength: | 26,1 N/mm² |
| Bending strength: | 5,2 N/mm² |
| Strength of adhesion to concrete: | 960,0 k Pa |
| EPS adhesion strength: | 100,0 k Pa |
| Capillary water absorption coefficient - kg/m². min 0,5: | 0,009 |
| Water vapour transmission coefficient - μ: | 15/35 |
| For tile bonding: | |
| Grip strength: | |
| - under tension: | 3,8 N/mm² |
| - after immersion in water: | 3,1 N/mm² |
| - after thermal treatment: | 3,8 N/mm² |
| - after 25 freeze-thaw cycles: | 3,1 N/mm² |
