PRODUCT
ЛП20 C2TS1
Adhesive for plates for external use ЛП20 C2TS1
Elastic adhesive for gluing terracotta, marble, granite tiles. It is suitable for gluing tile on tile, as well as for floor coverings on floors with a heating system.
Strengths:
• Easy to make the mixture.
• Easy to stick.
• Excellent smoothing.
• High elasticity for cement mixtures.
• Waterproof.
• Environmentally friendly.
PREPARATION
The base must be dry, hard, well cleaned of dirt - dust, greasy stains, etc. One package of 25 kg is mixed with 5.5 l of water. The dry mixture is mixed with the water in a plastic container with a mechanical stirrer or by hand. Allow the mixture to stand for about 10 minutes, then stir again and add more water if necessary. The mixture when prepared can be used within 20 minutes.
Laying
The solution is applied to the base with a notched trowel. Laying should be done on a dry base and at a temperature of 5ºС to 30ºС.or the edge of a trowel.
RECOMMENDATION
It is not recommended to add other materials to the finished solution.
SPENDING RATE
3.5 kg/m² with a trowel tooth size of 5 mm
5.4 kg/m² with a trowel tooth size of 8 mm
EXPIRY DATE
18 months from the date of manufacture
STORAGE
Store in a dry and ventilated place.
PACKAGE
25 kg
technical specifications
| Graininess: | up to 0,5 mm |
| Initial tensile grip strength: | 1,2 N/mm² |
| Tensile strength after immersion in water: | 1,0 N/mm² |
| Tensile strength after thermal treatment: | 1,1 N/mm² |
| Tensile strength after 25 freeze/thaw cycles: | 1,0 N/mm² |
| Slip: | 0,5 mm |
| Transversal deformation: | 2,8 ± 0,1 mm |
