PRODUCT
CONTACT PRIMER
Contact primer
Product with universal application. Extremely suitable for application on substrates with reduced water absorption in order to provide the appropriate base for the final coatings.
Strengths:
• Hardens and creates an intermediate rough film for better base and top coat contact.
• Improves contact between old and new foundations.
PREPARATION
The base must be dry, free of grease and formwork oil residues. Old, poorly bonded coatings must be removed.
Laying
Applied with a paint brush, roller or gun.
RECOMMENDATION
Do not work at temperatures below 5°C. During work, the surface must be protected from precipitation. After use, the tools should be washed immediately with water. If it gets on the skin, it should be washed off as quickly as possible (even though the substances used in the primer meet all sanitary and medical standards for harmlessness), because the primer polymerizes (dries), and subsequently its removal becomes difficult. It is not recommended to add other materials to the finished solution.
SPENDING RATE
120 g/m² when applied to tiles
300 g/m² when applied to highly absorbent
surfaces
EXPIRY DATE
18 months from the date of manufacture
STORAGE
In dry rooms, at a temperature of 5°C to 30°C. Protect from direct sunlight.
PACKAGE
5 l (4.5 kg) and 15 kg cuts.
technical specifications
| Density: | 1,07 g/cm³ |
| Adhesion: | 0,18 N/mm² (БДС EN 4624); |
| Drying time at touch: | 2,5 hours (at 20°C and relative humidity of the air of app 80%) |
| pH: | 6,5 - 7,5 |
| Emmision of volatile organic compounds in accordance with directives 2004/42/EC: | The maximum VOC content for this product (category: A/I) is 300g/l. |
| Color range: | Pink |
| Cleaning up the tools: | with water |