PRODUCT
TRAVERTINO
DECORATIVE PLASTER
Decorative plaster ProTRAVERTINO
Decorative plaster with the look of luxurious stone cladding for both interior and exterior use.
PREPARATION
Before application, the surface must be cleaned of dust and loose particles. Two coats of ProFundis Primer are applied, with the second coat applied after the first coat has dried.
Laying
It is applied with a trowel in one layer with a thickness of 1-2 mm.
DECORATION
After applying a layer of the desired thickness, the surface is treated with an embossing pad. After the layer has dried, an additional transparent tinted ProGLAZES latex is applied to it, which is rubbed using a plastic/rubber squeegee or sponge.
RECOMMENDATION
Shake the package before use. Do not work at temperatures below 5°C. After use, the tools should be washed immediately with water. If it gets on the skin, wash it off as quickly as possible with water (although the substances used in ProTravertino meet all health and medical standards for harmlessness, it dries out and is subsequently difficult to remove). The addition of other materials is not recommended.
SPENDING RATE
Approximately 1.2–1.6 kg/m2, depending on layer thickness.
EXPIRY DATE
18 months from the date of manufacture
STORAGE
In dry rooms, at a temperature of 5°C to 30°C. Protect from direct sunlight.
PACKAGE
5 kg, 10 kg, 25 kg cuts.
technical specifications
| Dilution: | ready to use |
| Application tools: | plastering trowel |
| Application temperature: | from 10 °C to 30 °C (at relative humidity of the air not exceeding 80%) |
| Drying time on palpation: | 3 hours (at 20 °C and relative humidity of the air of approximately 80%) |
| Full drying: | 1 day (at temperature 20 °C and relative humidity of 80%) |
| Viscosity: | 18 000 ÷ 22 000 CPS Brookfield (at temperature 25 °C and RVT 20 vol/min) |
| Tools cleaning: | with water |
