PRODUCT
GLAZES
ProGLAZES transparent paint
Decorative, transparent, water-dispersion acrylate-based wall varnish. Ideal decorative and protective coating on gypsum and lime plasters, plasters, plasterboard, etc. It is preferably used as a decorative finishing layer over PROANTICO or PROTRAVERTINO. It is suitable for decorating interior and exterior walls.
Strengths
• Resistant to washing and rubbing.
• Good vapor permeability.
• It is not toxic.
PREPARATION
Before application, the surface must be cleaned of dust and loose particles. Apply two coats of Profundis primer, the second coat being applied after the first coat has dried. In case it is applied over ProAntico, priming is not mandatory.
Laying
It is applied with a paint brush, roller, gun or sponge. The surface is then treated with a special technique, and immediately before the applied ProGlazes dries, a part of the surface layer is removed using a plastic/rubber squeegee or the edge of a trowel.
RECOMMENDATION
Shake the package before use. Do not work at temperatures below 5°C. After use, the tools should be washed immediately with water. If it gets on the skin, wash it off as quickly as possible with water (although the substances used in ProGlazes meet all sanitary and medical standards for harmlessness, it dries and subsequently is difficult to remove). It is not recommended to add other materials except water (in order to achieve less coverage of ProGlazes to emphasize the decorated surface).
SPENDING RATE
Approximately 100 g/m² for one layer
EXPIRY DATE
18 months from the date of manufacture
STORAGE
In dry rooms, at a temperature of 5°C to 30°C. Protect from direct sunlight.
PACKAGE
1 kg, 5 kg
technical specifications
| Specific weight: | 1 000 kg/cu.m ± 3 % |
| Appearance: | homogeneous liquid pH: 6,6 - 7,6 |
| Dilution: | ready to use |
| Drying time at touch: | 2,5 hours (at 20°C and relative humidity of the air of app. 80%) |
| Complete drying up: | 24 hours (at 20°C and relative humidity of the air of app. 80%) |
| Emission of volatile organic compounds: | The maximum VOC content for this product (category: A/l) is 200 g/l. |
| Colour range: | Tinted by catalogue in the desired colour |
| Water permeability coefficient: | 0.40 kg/m2.h0.5 (BDS EN 1062-3) |
| Cleaning up of the tools: | with water |
