PRODUCT
PUTTY DENKOL
PUTTY WITH FIBERS - DENKOL
Fiber cement, white and gray, for plastering EPS thermal insulation boards
Strengths
• excellent adhesion to the base
• excellent smoothing
• let’s in gases and vapors
• environmentally friendly
PREPARATION
The surface must be clean, free of dust and any dirt.
One package of 25 kg is mixed with 8 Litres of water. The contents of the entire package are added in parts and mixed with a Sofia mechanical stirrer (or by hand) until a homogeneous, soft, plastic and smooth mixture is obtained. From time to time the solution is stirred.
The water temperature should not be above 20°C.
Laying
The solution is applied manually with a trowel (trowel) up to 30 minutes after its preparation. After a few minutes, it is spread with a trowel vertically and horizontally until a flat and smooth surface is obtained. Laying should be done on a dry base and at a temperature of 5ºС to 25ºС.
Processing time: 30 minutes.
RECOMMENDATION
It is not recommended to add other materials to the finished solution.
EXPIRY DATE
18 months from the date of manufacture
STORAGE
Store in a dry and ventilated place.
PACKAGE
25 kg
technical specifications
| Compressive strenght: | 19,6 N/mm² |
| Bending strenght: | 4,8 N/mm² |
| Bond strenght of concrete: | 700 kPa; |
| ESP: adhesion strenght: | 110 kPa; |
| Capillary absorption coefficient - kg/m². min 0,5: | 0,007; |
| Coefficient of the thermal conductivity: | 2 N/mm² |
| Water vapour transmission coefficient: | 15/35 |